| Description of equipment |
Basic technical specification |
| Cap and hose |
Adaptor from London Round Threaded hydrant to Rectus Type 21 female fitting to allow pressure transducers to be attached. |
| Primelog 2i 5 bar |
Dual channel data logger with internal 5 bar pressure transducer, and digital channel for pulsed input (e.g. flowmeter) |
| Primelog 2i 10 bar |
Dual channel data logger with internal 10 bar pressure transducer, and digital channel for pulsed input (e.g. flowmeter) |
| Primelog 2i 16 bar |
Dual channel data logger with internal 16 bar pressure transducer, and digital channel for pulsed input (e.g. flowmeter) |
| Primelog 2i 20 bar |
Dual channel data logger with internal 20 bar pressure transducer, and digital channel for pulsed input (e.g. flowmeter) |
| Primelog 2 |
Dual channel data logger with connection for analogue signal from external transducer, and digital channel for pulsed input (e.g. flowmeter) |
| PSMT pulse probe |
Pulse output cable from Kent/ Elster PSM meter to Primelog datalogger |
| Kent LRP pulse head |
Low Resolution pulse head from Kent Helix 3000 flowmeter to Primayer datalogger |
| Kent 4000 Reed switch |
Pulse head from Kent/ Elster Helix 4000 flowmeter to Primayer datalogger |
| Kent HRP Pulse Head |
High Resolution pulse head from Kent Helix 3000 flowmeter to Primayer datalogger |
| Schlumberger pulser |
Pulse head from Schumberger/ Actaris flowmeter to Primayer datalogger |
| 4-20mA lead |
6mm jackplug to Primayer datalogger cable for 4-20 mA signals |
| Aquameter lead |
Primayer connector |
| Depth transducer |
External 1 bar pressure trasnducer on 10m cable for use logging tanks and reservoirs |
| Pump tester |
Radcom Monitor |
| Multi channel logger |
Datataker DT 800 |
| Transient logger |
25 bar internal pressure transducer logger capable of high frequency logging to 1/100th second |
